BioPellets are consumed by bacteria, which is why new pellets need to be added every 6-12 months to compensate for digested filter media. This can be seen during inspection of the filter or when you measure a increase of nitrates. These figures however depend on aquarium conditions and are strongly influenced by feeding regimes and livestock. Taking regular measurements of both nitrate and phosphate levels in the aquarium is recommended, after which dosages may be increased or decreased.
We suggest placing the outlet of the pellet filter in front of a protein skimmer, to limit the amount of bacteria entering the system. This has the additional benefit of increased gas exchange (CO2-removal and O2-addition). The pellets should never be used without sufficient aeration, as this may lead to low oxygen and pH levels, especially during night time. Proper aeration can be established with air pumps and protein skimmers.
All-In-One NP Reducing BioPellets will allow more feedings and thus more livestock, however, when heavy feeding is required, it is recommended to combine the pellets with standard phosphate adsorbents. The reason for this is that most aquarium feeds contain higher levels of phosphate than is consumed by bacteria, fish and invertebrates, when compared to nitrogen. Some phosphate adsorbents however deplete alkalinity and may reduce pH. Using phosphate adsorbent media based on iron hydroxide does not have this disadvantage. The All-in-One BioPellets already containing a phosphate remover which makes the use of an additional in most situations unnecessary.
You can't overdose the BioPellets. Once your filter system is working optimal, the number of bacteria fluctuate according to the availability of nitrates and phosphates. When the availability of nitrates and phosphates is low, the numbers of bacteria will decrease